Name: KP
SKU: KP1A/KP1B
Availability: InStock

EN1028 rated performance to 1500 l/min at 10 bar
Small size allows room for additional equipment
5 year maintenance intervals reduces downtime and maintenance costs
Single piston primer has simple construction for low cost of ownership, with fewer parts
Fail safe electric primer shutoff ensures primer is not activated at higher speeds, greatly increasing the life of the primer
Primer seal assembly removed by two bolts so assembly can be maintained at a work bench Identical plumbing can be used on engine and opposite engine rotation pumps
Three gearbox orientations - Left, right, and down orientations for installation flexibility
Three volute orientations - Left, right, and vertical orientations for plumbing flexibility
1.90:1, 2.33:1, 2.91:1 ratios to suit most engine and PTO applications
Available in light alloy or gunmetal

Weight	114.4 lbs Aluminium, 174 lbs Bronze
Brand	KP
Length	19,4 (493)
Width	12 (300)
Height	18 (457)
Flow (GPM)	484.6 gpm
Flow (LPM)	2200 l/min
Rated Output LPM	1500 l/min @ 10 bar - FPN 10-1500
Rated Output GPM	330.4 gpm @ 145 psi
Maximum outlet pressure bar	17 bar
Maximum outlet pressure psi	248 psi
Priming time to 7.5m with 100mm suction hose	30 seconds (100mm hose)
Recommended priming speed	3000 rpm (impeller)
Maximum recommended priming speed	3000 rpm
NFPA 1906 or EN Rated Capacity	FPN 10-750, FPN 10-1000, FPN 10-1500, FPN 15-1000
Thermal relief valve action	42C or 74C (108F to 165F)
Impeller material	Hard anodized aluminium alloy
Volute material	High strength corrosion resistant aluminium alloy(Gunmetal Optional)
Seal type	Mechanical seal
Drive	PTO
Pump type	Single Pressure

	Name	Sheet #
	KP1 Aluminium Pump Specification 12-2014 Rev2
	KP1 Bronze Pump Specification 4-2015 Rev1

	Name	Sheet #
	KP Installation & Operation Manual

Name	Type
DS670_REV1 - KP1 - Performance Curve
KP 6 Page Brochure

KP

Related Products