 |
SmartFOAM Software Update
Download Latest update to USB.
Plug in USB Adapter to back of display with USB.
Enter passcode: 2668 in the menu screen.
Use Up and down arrows to find Update-SmartFOAM_1.XX.tar
XX:LATEST REVISION (CHECK BACK HERE FOR UPDATES)
Hit the right arrow twice to confirm and update.
1.21 functionality update:
Moved water calibration to annual
Set the maintenance interval to the foam unit run time. So if the unit isn't running the maintenance interval also doesn't run.
1.20 functionality updates:
Added OEM menu item (2314 menu) to select style of 2nd pump (1.7, 2.1, 3.3, 5.0, etc). Updated limp home mode for secondary pump to use correct model.
Allow piston pump models(1.7 and 2.1) to use prime button. These two pumps used to hide the prime button.
Added auto enable in the OEM menu (2314 menu). When enabled, the system will turn ON when water flow is detected. This is defaulted to DISABLE.
Update the “water flow buffering” value in the FACTORY menu – password 57643. Useful for turbulent flows condition for the water flowmeter.
|
|
1.21 |
2019-04-29 15:20:57 |
|
SmartFOAM Bid Specification
